Bench Notes – May 18, 2009

bench notes_bd

  • Brass Chemical Cleaning Now Available at Salisbury Music
  • King Musical Instrument Historical Site
  • Custom Sax Palm Key Risers
  • Contrabass Sax Quartet Video
  • Repair Tool of the Week  –  Screwdrivers

 

Brass Chemical Cleaning Now Available at Salisbury Music

Our High-Tech Chemical Tank Several months ago I attended a band instrument repair clinic in Norfolk, VA, where one of the clinicians talked about the "proper" way of cleaning the inside of brass instruments. Over the years there have been many theories and processes of chemical cleaning, but each had their issues. Due to those issues Salisbury Music has never been an advocate of "chemical cleaning". The clinician, Ken Skitch, had a trombone customer that also happened to own a chemical company. One day, while the customer was in the store he asked Ken how he "cleaned" the inside of brass instruments. After Ken explained the process he used, the customer told him he was doing it all wrong, and would get back to him. Long story short, Ken and the customer developed a brass cleaner that effectively cleans the crud and gunk out of the inside of a brass instrument, without etching or degrading the structural material of the instrument, whether it’s brass, nickel or silver. This solution is safe with lacquer and plated instruments.

One of the more common problems with brass instruments I have been seeing recently is the corrosion and degradation of the brass from the "junk" that’s not getting effectively cleaned out. This is even more evident on newer instruments that have less metal mass than older sturdier instruments. Compare a 30-year-old Olds Ambassador Baritone to a new Jupiter Baritone and you’ll see exactly what I’m talking about.

Salisbury Music is now proud to offer this "chemical-cleaning" service to the customers on the Eastern Shore. While our system is hardly high tech, we are now able to chemically clean the inside of the following instruments:

  • trumpets
  • trombones
  • mellophones
  • marching brass
  • french horns
  • baritones/euphoniums
  • saxophone bodies

Basically anything other than tubas at this stage, although we may be able to fit small 3/4 tubas in our tank, but we’ll have to see.

Below are some before and after pictures of a trumpet we chemically cleaned. If you have any questions or would like more information, feel free to contact me.

BEFORE                                                    AFTER

bundy_before1 bundy_after1

bundy_before2 bundy_after2

 

 

KING MUSICAL INSTRUMENTS

King Musical Instrument Historical Site

This is a very cool website I stumbled across on the history of King Musical Instruments.

Check it out HERE

 

Custom Sax Palm Key Risers

Custom Palm Key Risers

A typical problem with saxophones is the height (or lack of) of the palm keys, that are played with the left hand. Depending on the size of the players hand, theses keys are sometimes quite below the palm of the hand. Adding Palm Key Risers is a fairly simple customization, allowing a player with larger hands to have a better “feel” for the instrument. In the pictures are the Custom Palm Key Risers I made for my personal sax (Yamaha YTS-875 Custom Series Tenor). These risers are made from a polymer material, baked to Custom Palm Key Risersharden them, and then lightly glued on. They are completely removable, should the player ever wish to sell the instrument or need to remove them for some reason. They are available in a variety of colors, mine just happen to be yellow.

Contrabass Sax Quartet Video

Piece for 4 Contrabass Saxophones (More specifically, 2 Eb Contrabass Saxophones, 1 Eb Tubax and one Bb Subcontrabass Tubax)
Written by Adam Gilberti, performed at UCLA by Jay C. Easton, Grant Green, Blaise Garza, and Adam Gilberti.

 

Repair Tool of the Week –   Screwdrivers

screwdriversPictured are just some of the screwdrivers I use in the repairing of band instruments. The 3 Red-Topped on the left are Wiha Phillips head screwdrivers. The other 11 multi-color top screwdrivers are Kraus slotted screwdrivers. These are screwdrivers made specifically for the band instrument repair trade. The colored tops are interchangeable, and I use the colors to denote what size blade each screwdriver is. That way if I’m using a green-topped screwdriver and need a longer or shorter length, it’s very easy to grab the correct one. Using the correct blade width is critical so that I don’t damage the slot in the screw/rod, or have the screwdriver slip out of the slot.

  • RED – Blade width=.060” x 1.5” length
    (used on flute/oboe adjustment screws)
  • GREEN – Blade width = .070” x 1.5”, 3”, & 6” lengths
    (rods on smaller woodwinds)
  • PURPLE – Blade width = .085” x 3” & 6” lengths
    (headless pivot screws on smaller woodwinds, smaller rods on saxes)
  • BLACK – Blade width =   .100” x 3” & 6” lengths
    (headed pivot screws on smaller woodwinds, stack rods on saxes)
  • GOLD – Blade width = .125 x 1.5” & 6”lengths
    (headed pivot screws on saxes and other large woodwinds)
  • BLUE – Blade width = .156 x 4” length
    (large pivot screws and flute pad screws)

Want to own a set?

Each screwdriver body, colored top, & blade costs me approximately $39.

Bench Notes – April 20, 2009

bench notes_bd

  • www.salisburymusic.com
  • Welcome to Bench Notes
  • Dead Stock Blow-Out
  • Essential Elements 2000 Price Increase
  • Band Shoes & Gloves
  • Repair Tool of the Week

 

www.salisburymusic.com

website It’s taken several years, but www.salisburymusic.com is finally back. Don’t expect anything exotic, just a place for information and a way to communicate to our customers. We’re doing this on a blogging platform(wordpress), although we’re not using it as a “blog” per say.

Here’s a quick tour:

  • This section your reading right now is where I’ll be be making announcements, sharing pictures or stories of things going on. Expect this section to change quite frequently.
  • Across the top, above our logo you’ll see a series of “text buttons”. Clicking on one of those will take you to a page with specific information about that aspect of our business. These text buttons will always be visible, no matter what page you happen to be on. Just click on FRONT PAGE, to return to the home page.
  • Down the right side(also always visible) are a series of boxes with information, links, etc.

Thank you for your continued support over the years.

 

Welcome to Bench Notes

bench notes_bd What you are reading is what will become a weekly newsletter that will be posted on Mondays on www.salisburymusic.com. It will be very similar to the weekly email we have been sending out for the past several months with Repair Tips, Sale Items, Video’s or Article’s of Interest, and who knows what else.

 

Dead Stock Blow-Out

cordier 

Cordier Alto Sax Reed Trimmer

  • Current Retail Price – $50 +/-
  • SALE PRICE – $25
  • Only one available

 

Essential Elements 2000
Price Increase

The Retail Price of ALL Essential Elements 2000 Books has gone up

ee2k_altobk1Book 1  Was $7.95  NOW $8.99
   (F. Horn & Oboe – NOW $9.99)
   (Percussion – NOW $14.99)

Book 2  Was $6.95  NOW $7.99
(Percussion – NOW $14.99)

Book 3 (Technique) Was $6.95  NOW $7.99

Salisbury Music is holding current prices on existing stock, so if you want Essential Elements 2000 Books at last years prices…..now is the time.

Band Shoes & Gloves

Did you know Salisbury Music sells band shoes & gloves?

drillmaster speedsters

image image

  • We come to your school and size your students
  • We label the boxes with your students names
  • We replace any shoes sized incorrectly

Have any questions? Need a catalog? Want a Price Quote? Give us a call

 

Repair Tool of the Week

Trombone Cork Barrel Mandrels (tenor trb. on top, bass trb. on bottom)

Corkbarrel Dent Mandrel These mandrels are used to remove dents in the cork barrel of the trombone slide. The cork barrels are the 2 pieces of short tubing at the top of the inside hand slide. (the slide lock is on the mouthpiece cork barrel) In the closed position, the outside slide goes up inside these cork barrels.  The smaller end of the mandrel fits between the inside slide and the cork barrel. In the pictures below you can see the mandrel partially over the slide, and fully in position.

cb_mandrel1_text cb_mandrel2_text

The advantage of these mandrels is that we do not have to un-solder the inside slide to remove dents in the cork barrel. We are able to remove the dents much easier, much quicker, and consequently less expensively.